74VHC374MX

74VHC374MX Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. The 74VHCseries comprises this type of FPGA. You should not exceed 120MHzin its output frequency. The element count is 1 . The number of terminations is 20. This D latch belongs to the family of 74VHC374. Power is provided by a 3.3V supply. There is 4pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as AHC/VHC. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. An electronic part with 8bits has been designed. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 2ports are embedded in the D flip flop. In terms of quiescent current, it consumes 4μA . A total of 8 channels are available.

74VHC374MX Features

Tape & Reel (TR) package
74VHC series
20 pins
8 Bits

74VHC374MX Applications

There are a lot of ON Semiconductor 74VHC374MX Flip Flops applications.

• Single Up Count-Control Line
• ATE
• Dynamic threshold performance
• Memory
• Individual Asynchronous Resets
• Registers
• Pattern generators
• Differential Individual
• Memory
• Circuit Design