74VHC574SJ

74VHC574SJ Overview

The package is in the form of 20-SOIC (0.209, 5.30mm Width). The package Tubecontains it. T flip flop uses Tri-State, Non-Invertedas the output. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74VHC series. Its output frequency should not exceed 115MHz Hz. In total, there are 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. It is powered from a supply voltage of 3.3V. There is 4pF input capacitance for this T flip flop. This D flip flop belongs to the family of AHC/VHC. Vsup reaches 5.5V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be kept above 2V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.

74VHC574SJ Features

Tube package
74VHC series

74VHC574SJ Applications

There are a lot of Rochester Electronics, LLC 74VHC574SJ Flip Flops applications.

• Dynamic threshold performance
• ESCC
• Frequency Dividers
• Control circuits
• Reduced system switching noise
• Common Clocks
• Clock pulse
• EMI reduction circuitry
• Event Detectors
• Synchronous counter