74VHCT373AMTCX

74VHCT373AMTCX Overview

The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). As a result, it has a packaging of Tape & Reel (TR). It uses Tri-State as the output. This electrical device has Logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. The supply voltage of the device is 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74VHCT family. The electronic part in this image has 8 bits. There is no doubt that it belongs to the family 74VHCT373. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Optimal efficiency requires 5V as the supply voltage. Input lines are converted into binary equivalents by 8 output lines. This object is composed of 1 elements. The superior flexibility of this circuit can be attributed to the use of 8 circuits. It is set to zero for the low level output current. There is -8mA output current at the high level. The operating temperature should be lower than 85°C. Temperatures higher than -40°C should be used for operation. 5.5V is the maximum voltage it supports. With a minimum supply voltage of 4.5V, it operates.

74VHCT373AMTCX Features

20-TSSOP (0.173, 4.40mm Width) package
74VHCT series
8 Bits
74VHCT373 family
20 pins
1 elements

74VHCT373AMTCX Applications

There are a lot of ON Semiconductor 74VHCT373AMTCX Latches applications.

• Timers
• Parallel data synchronization
• Serial Output Data Queuing
• Parallel Input
• Hammer Device Information
• Watches
• Registers
• Shift left with parallel loading
• A/D and D/A conversion
• OC-48 communication systems