ADC08D1500CIYB/NOPB

ADC08D1500CIYB/NOPB Overview

The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 128-LQFP Exposed Pad package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 128 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.9V.The A/D converter has 2 channels.The is equipped with 128 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 1.5G Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Folding Interpolating.There are 128 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.8V~2V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to ADC08D1500 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 1.8V~2V.There is a possibility of mounting the analogue to digital converter by using the Surface Mount axis.The ADC converter operates with the maximal supply voltage of 2V.It operates with the minimal supply voltage of 1.8V.This electrical digital converter operates from a supply voltage of 1.9V.The maximal analog input voltage of this electrical AD converter is 0.95V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 2.3W. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 2.3W.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 1.5 Gsps.The minimal analog input voltage of this electrical AD converter is -0.95V.Simultaneous Sampling can be ensured when operating.

ADC08D1500CIYB/NOPB Features

1 Functions
128 basic kinds of terminations
128 pin count
Minimal supply voltage of 1.8V

ADC08D1500CIYB/NOPB Applications

There are a lot of Texas Instruments ADC08D1500CIYB/NOPB ADC applications.

• Digital beam-forming systems for ultrasound
• Multiplexed Data Acquisition Systems
• Data Acquisition Systems
• Digital Multimeters, PLC's (Programming Logic Controllers)
• Music recording
• Spectrum Analysis
• CMOS Image sensors for mobile applications
• Medical Instrumentation and medical imaging
• Scientific instruments
• Handheld Terminal Interface