ADF4002SRU-EP-RL7

ADF4002SRU-EP-RL7 Overview

As a clock IC, it is packaged by the Digi-Reel? method. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. 16 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3V. A clock generator's input is called CMOS, TTL and it is designed as the input for this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 400MHz maximum. PLL clock is mounted in the way of Surface Mount. The supply voltage for this frequency synthesizer should be kept above 2.7V for safety considerations. Clock generators should operate with the voltage supply of 2.7V~3.3V. Test statistics estimate a temperature of -55°C~125°C, which should be set as the ambient temperature. There are several logic levels in Clock logic that can be used with this clock generator. A Clock/Frequency Synthesizer (RF), Phase Detector is a classification for the electronic part in question. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. It is possible to find its related electronic parts by searching for the base part number ADF4002. There are 16 pins that are available on the frequency generator. PLL clock can handle a voltage of 3.3V as its supply voltage. This time clock generator requires a supply current of 5mA in order to operate properly.

ADF4002SRU-EP-RL7 Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3.3V

ADF4002SRU-EP-RL7 Applications

There are a lot of Analog Devices Inc. ADF4002SRU-EP-RL7 Clock Generators applications.

• Carrier synchronization in wired communication
• Deep space exploration
• Modems
• High-speed optical transport network (OTN)
• Automatic test equipment
• Mixed mode (analog and digital) applications
• Infotainment systems
• Skew suppression
• Pagers
• Peripheral devices