ADF4107BRU-REEL

ADF4107BRU-REEL Overview

Clock ICs are packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 240 degrees of temperature during reflowing. As you can see, it consists of 16 terminations. This clock generator ic should receive a voltage of 3V. A clock generator's input is called CMOS, TTL and it is designed as the input for this clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. A clock-based RF synthesizer that provides a max frequency of 7GHz is available. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock generator ic works with 2.7V~3.3V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with Clock logic levels. As far as electrical parts go, this component can be classified as a Clock/Frequency Synthesizer (RF) component. In particular, this clock PLL is designed to be used with microprocessors. According to the base part number ADF4107, its related parts can be found. A 16 pin is available on the PLL. In terms of the supply voltage, PLL clock can handle 3V volts. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. Clock PLL is configured with 2 output. Time clock generator requires a supply current of 17mA to fully function.

ADF4107BRU-REEL Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V

ADF4107BRU-REEL Applications

There are a lot of Analog Devices Inc. ADF4107BRU-REEL Clock Generators applications.

• Symbol synchronization
• MRI
• DVD recorders
• Mechanical devices
• 10 Gigabit Ethernet
• Motor speed controls
• Local oscillator source in receiver
• 1 Gigabit Ethernet
• Skew suppression
• Digital logic circuits