ADF4360-5BCPZRL7

ADF4360-5BCPZRL7 Overview

Tape & Reel (TR)-method packaging is used for clock ICs. Embedded in the 24-WFQFN Exposed Pad, CSP package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. 24 terminations can be found in frequency generators. This electronic frequency generator requires a voltage of 3.3V. In this case, CMOS, TTL is designed to be the input of the clock generator. Using 1 circuits, the electronic part's full performance can be accessed. It provides a maximum frequency of 1.4GHz. PLL clock is mounted in the way of Surface Mount. There should be 3V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. A Fanout Distribution, Integer N Synthesizer (RF) is a classification for the electronic part in question. In this IC, a 24-bit frequency generator is designed specifically for use in microprocessors. Related electrical parts can be found for the base part number ADF4360. There is a 24 pin that is available on the digital clock generator. Electronic frequency generator can handle voltages up to 3.3V. The device is usually classified as a type of Other Telecom ICs device. The output frequency is magnified as high as possible with 3 signal outputs. A supply current of 45mA is required to fully operate clock PLL.

ADF4360-5BCPZRL7 Features

Available in the 24-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

ADF4360-5BCPZRL7 Applications

There are a lot of Analog Devices Inc. ADF4360-5BCPZRL7 Clock Generators applications.

• Ultrasound diagnosis
• Cell phones
• Small signal recovery
• Microwave backhaul IF
• FMCW Radar
• Signal modulation and demodulation
• Main oscillator in receiver
• High-speed communication applications
• Digital logic circuits
• Frequency synthesis