ADF5000BCPZ

ADF5000BCPZ Overview

Tray-method packaging is used for clock ICs. The 16-WFQFN Exposed Pad, CSP package contains this clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 16 terminations found in this file. For this clock generator ic, a voltage of 3.3V is required. Clock is designed for clock generator's input. For full access to the electronic component's capabilities, 1 circuits are implemented. This component can be conveniently installed on the panel thanks to the Surface Mount. It would take a maximum supply voltage of 3.6V to operate this time clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. There are 3V~3.6V available for use with this clock PLL. The ambient temperature should be set at -40°C~105°C, which is estimated by the test statistics. This electronic component can be classified as a Prescaler (RF). In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. According to the base part number ADF5000, its related parts can be found. There is a 16 pin that is available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that frequency generators can handle. The clock PLL is generally classified as a Prescaler/Multivibrators device. At a frequency of 18GHz, frequency generator is capable of achieving high efficiency. A supply current of 30mA is required to fully operate clock PLL.

ADF5000BCPZ Features

Available in the 16-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

ADF5000BCPZ Applications

There are a lot of Analog Devices Inc. ADF5000BCPZ Clock Generators applications.

• Telecommunication systems
• Pagers
• FM demodulation networks for FM operations
• CB radios
• Clock signals to the high-speed Digital RF circuits
• High-frequency induction heating
• Test equipment
• Communication infrastructure
• Time to digital converters
• Laptops