ADM1818-R23ART-RL7

ADM1818-R23ART-RL7 Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. The power management is mounted by a Surface Mount-axis. Power management has a total of 3 pins. This power management has 3 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~105°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a supply current of 16μA for the power management. A similar IC managements number of the manufacturer can always be found by using ADM1818, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.

ADM1818-R23ART-RL7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current

ADM1818-R23ART-RL7 Applications

There are a lot of Analog Devices Inc. ADM1818-R23ART-RL7 Voltage Supervisors applications.

• Battery cars
• Automotive power systems
• Radio
• Network equipment
• Power distribution systems of operating room
• Detection of phase loss
• Power distribution systems of infant care room
• Leakage current detection
• emergency room
• Refrigeration