ADM692AARNZ-REEL

ADM692AARNZ-REEL Overview

There are 8 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. IC management conducts in a 5V-voltage supply. The power management is mounted by a Surface Mount-axis. A total of 8 pins are located on this power management. Pin count of the power management is 8. It is recommended that Vsup should not be less than 1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 100μA volt supply current. It is always advisable to use ADM692, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 100μA. There are 1 inputs monitored at once on the power management.

ADM692AARNZ-REEL Features

Battery Backup Circuit type
Minimum supply voltage of 1V
100μA operating supply current

ADM692AARNZ-REEL Applications

There are a lot of Analog Devices Inc. ADM692AARNZ-REEL Voltage Supervisors applications.

• Battery cars
• DVR
• Multi-voltage system
• Microcontroller system
• Battery-powered equipment
• Rechargeable batteries
• Digitally controlled LDO regulators circuit
• Medical-specific isolation transformer
• Efficient information transmission
• Magnetic resonance imaging