ADM8613Y232ACBZ-R7

ADM8613Y232ACBZ-R7 Overview

There are 6 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Cut Tape (CT). In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. There are 6-WFBGA, CSPBGA functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2V. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. Taking into account all of the pins, this power management has a total of 6. 6 pins make up the power management. A voltage (Vsup) that doesn't fall below 900mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. It is always advisable to use ADM8613, the base supervisor number, when searching for similar PMICs from the manufacturer.

ADM8613Y232ACBZ-R7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV

ADM8613Y232ACBZ-R7 Applications

There are a lot of Analog Devices Inc. ADM8613Y232ACBZ-R7 Voltage Supervisors applications.

• Battery cars
• FPGA design
• Magnetic resonance imaging
• Smart meter
• Radar
• DVR
• Military communications
• Stable power system
• Electronics installed in the vehicle
• Telecommunications equipment