ADP1828ACPZ-R7

ADP1828ACPZ-R7 Overview

Capsuled in the 20-WFQFN Exposed Pad, CSP package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 3V~20V and has a 3V~20V supply voltage. A -40°C~85°C TA dc switcher is not a problem. This switching controller can switch at 300kHz 600kHz. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a QUAD terminal on the switching converters. 20 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 12V volts. In addition to "ADP1828", there are other relevant dc to dc converter ics you can find. Pins number 20 of switching converter in total. Statistically, DC regulator outputs 20.4V volts. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 93 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThe max frequency of the pmic can reach 720kHz. It is suggested that users apply 24V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. A voltage of 3V must be present in the supply. DC switcher will not be able to provide an output current above 30A volts. Depending on the datasheet, the switching converter can output 17V volts at its peak. A supply current of 15μA is used to power it. Its lowest voltage output is not less than 600mV. This the controllers dc receives a 3mA nominal current supply.

ADP1828ACPZ-R7 Features

Transistor Driver Outputs
Switching Frequency: 300kHz 600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %

ADP1828ACPZ-R7 Applications

There are a lot of Analog Devices Inc. ADP1828ACPZ-R7 DC to DC converter applications.

• Domestic water pumps
• Imported equipment
• Printing
• Various precision measuring instruments
• Nuclear power plants
• Injection molding machinery
• Post equipment
• Experimental setup
• Refrigerators of central air conditioners
• Flaw detection equipment