ADP1870ACPZ-0.6-R7

ADP1870ACPZ-0.6-R7 Overview

The switching controller fits in the 10-VFDFN Exposed Pad, CSP package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 2.95V~20V and has a 2.95V~20V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 600kHz. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Enable is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 10 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics can be found by searching "ADP1870". 10 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Statistically, DC regulator outputs 600mV volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. Voltage regulator dc to dc is designed to operate at 65 % duty cycle during power-ups and power-downs to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThis value is MINIMUM OUTPUT VOLTAGE: 0.6V so that DC to DC voltage regulator better serves the purpose. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 20V. The maximum input voltage of dc switcher is 20V, so users should limit their voltage accordingly. There must be a 2.95V supply voltage. As per its datasheet, the switching converter has a maximum output of 18V volts. It runs on a 140μA supply current. The voltage controller's lowest voltage output is not less than 600mV. This the controllers dc has a nominal current supply of 1.1mA.

ADP1870ACPZ-0.6-R7 Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 65 %
MINIMUM OUTPUT VOLTAGE: 0.6V

ADP1870ACPZ-0.6-R7 Applications

There are a lot of Analog Devices Inc. ADP1870ACPZ-0.6-R7 DC to DC converter applications.

• Various precision measuring instruments
• Textile machinery
• Television equipment
• Series voltage regulation circuits
• Driver circuits
• Post equipment
• Domestic water pumps
• PSRR circuits
• Automatic testing equipment
• Digital video recorders