ADP1870ARMZ-0.6-R7

ADP1870ARMZ-0.6-R7 Overview

This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. For 1 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 2.95V~20V volts and has 2.95V~20V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 600kHz. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 10. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "ADP1870". 10 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. DC regulator outputs 600mV voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 25A when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 65 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sIn order to satisfy the need, DC to DC voltage regulator has a value of MINIMUM OUTPUT VOLTAGE: 0.6V. It is suggested that users apply 20V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. A voltage of 2.95V is required for the supply. Its datasheet indicates the switching converter can output a maximum of 18V volts. 140μA volts is the supply current. There is 600mV voltage output lower than 600mV on the voltage controller. nominal current supply for this the controllers dc is 1.1mA.

ADP1870ARMZ-0.6-R7 Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 65 %
MINIMUM OUTPUT VOLTAGE: 0.6V

ADP1870ARMZ-0.6-R7 Applications

There are a lot of Analog Devices Inc. ADP1870ARMZ-0.6-R7 DC to DC converter applications.

• Post equipment
• Computer application technology
• Printing
• Automatic plug-in machines
• Surface processing equipment
• Drilling machines
• Planers
• Electrical distribution systems
• Machining centers
• Computer rooms