ADP1873ARMZ-0.3-R7

ADP1873ARMZ-0.3-R7 Overview

Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. dc motor controller is suitable for 1 output generation. PMIC is packaged in a solid enclosure of Tape & Reel (TR). There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 2.75V~20V. Worked in an dc switcher with a -40°C~125°C TJ rating. The switching controller is capable of switching at the 300kHz position. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 10. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Searching "ADP1873" will return other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 600mV. You should note that the dc dc regulator's usual output current is 25A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 84 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. The value of DC to DC voltage regulator is set to MINIMUM OUTPUT VOLTAGE 0.6V in order to better satisfy the requirement. To run the voltage regulator dc to dc safely and reliably, users should apply 5.5V to the voltage regulator dc to dc. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 5.5V. Voltage 2.75V is necessary for the supply. In this case, the dc switcher won't produce more than 25A watts of output current. The datasheet indicates that the switching converter can output 4.67V volts at its maximum. The supply current of the voltage controller is 140μA. Its lowest voltage output is not less than 600mV. There is 70mA nominal current supply for this the controllers dc.

ADP1873ARMZ-0.3-R7 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
MINIMUM OUTPUT VOLTAGE 0.6V

ADP1873ARMZ-0.3-R7 Applications

There are a lot of Analog Devices Inc. ADP1873ARMZ-0.3-R7 DC to DC converter applications.

• Adjustable voltage or current linear circuits
• Surface processing equipment
• Energy management systems
• Computer monitoring equipment of building
• Refrigerators of central air conditioners
• Handheld GPS
• Serial communication converter
• Drilling machines
• Cutting machine tools
• Thermal power