ADP1874ARQZ-0.6-R7

ADP1874ARQZ-0.6-R7 Overview

The switching controller fits in the 16-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 2.95V~20V voltage are supplied and operated. Work well in dc switchers with a -40°C~125°C TJ. This switching controller can switch at 600kHz. The Surface Mount value makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start, Tracking. The switch converters are connected to a SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 16. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 12V. Searching "ADP1874" will return other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. A 600mV voltage of DC regulator was detected in the test statistics. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 65 % during power-up and power-down. This Surface Mount makes DC switcher suitable for most prototypes and applications. It is estimated that this dc regulatorhas a maximum frequency of 600kHz. For better satisfaction, the value of DC to DC voltage regulator is ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V. When running the voltage regulator dc to dc in a circuit, users should apply 20V to ensure safety and reliability. The dc switcher's maximum input voltage is 20V; users must limit it accordingly. 2.95V is the required supply voltage. Input current cannot exceed 25A with this dc switcher. The switching converter can output 18V volts at its utmost, according to the datasheet. There is 1.1μA supply current for it. At its lowest voltage, the voltage controller does not produce less than 600mV.

ADP1874ARQZ-0.6-R7 Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 65 %
ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V

ADP1874ARQZ-0.6-R7 Applications

There are a lot of Analog Devices Inc. ADP1874ARQZ-0.6-R7 DC to DC converter applications.

• Printing equipment
• CMM
• Hydro power
• Adjustable voltage or current linear circuits
• Network technology
• USB circuits
• Computed tomography (CT)
• Solar power plants
• Boring machines
• Product testing