All Products

ADP195ACBZ-R7

P-Channel 0.5mm PMIC ADP195 4 Pin 1.8V 4-UFBGA, WLCSP


  • Manufacturer: Analog Devices Inc.
  • Origchip NO: 84-ADP195ACBZ-R7
  • Package: 4-UFBGA, WLCSP
  • Datasheet: PDF
  • Stock: 837
  • Description: P-Channel 0.5mm PMIC ADP195 4 Pin 1.8V 4-UFBGA, WLCSP (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 4 weeks ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-UFBGA, WLCSP
Number of Pins 4
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Slew Rate Controlled
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 100mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory Peripheral Drivers
Max Power Dissipation 360μW
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADP195
Pin Count 4
Number of Outputs 1
Output Type P-Channel
Max Output Current 1.1A
Operating Supply Voltage 3.6V
Voltage 3.6V
Interface On/Off
Operating Supply Current 5μA
Current 200mA
Output Configuration High Side
Power Dissipation 360μW
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 1.1V
Max Input Voltage 3.6V
Nominal Input Voltage 3.6V
Ratio - Input:Output 1:1
Voltage - Load 1.1V~3.6V
Driver Number of Bits 1
Fault Protection Reverse Current
Rds On (Typ) 50m Ω
Height 370μm
Length 1.07mm
Width 990μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADP195ACBZ-R7 Overview


It is package in Tape & Reel (TR) case.In the 4-UFBGA, WLCSP package, it is included.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of P-Channel volts.A lighting driver with Slew Rate Controlled features is available.It comes under the family of ADP195.In total, there are 4 terminations.For operation, 4 pins are used.There are 1 functions of the LED driver.The maximum output current is reduced to 1.1A to meet the operation criteria.With a supply voltage of 1.8V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 4 pins.Currently, the LED driving board has 100mOhm resistance.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In order to achieve the best efficiency, the supply voltage should be set to 3.6V.As far as input voltage goes, its maximum is 3.6V volts.There is a minimum input voltage of 1.1V volts.

ADP195ACBZ-R7 Features


Supplied from 1.8V
Resistance of 100mOhm

ADP195ACBZ-R7 Applications


There are a lot of Analog Devices Inc. ADP195ACBZ-R7 Power Switches ICs applications.

  • Low Voltage I/O System Power
  • Portable Devices
  • Portable/Handheld Devices
  • Storage (HDDs, SSDs)
  • Portable GPS Device
  • Solid-State Drives
  • Various applications equipped with buttons
  • USB Protection
  • Portable GPS
  • USB Power Distribution