ALD2301APAL

ALD2301APAL Overview

The product is packaged in 8-DIP (0.300, 7.62mm) to facilitate transportation.The comparator has a type CMOS, NMOS, Open-Drain, TTL output.The chip is packaged with Tube .A comparator of this type is typically of type General Purpose .Electronic comparator consists of 2 elements in total.Electronic comparator is recommended to mount using type Through Hole .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.There is a quiescent current of 180μA in this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 18μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 18μA .There is a maximum current that can be input into the device of 200pA .An increase in temperature over 70°C is not recommended.Comparator electronics cannot be operated at a temperature lower than 0°C .There is a maximum voltage supply on the comparator of 12V .The comparator is capable of operating at a minimum supply voltage of 3V .2 channels cooperate together to maintain the output quality.

ALD2301APAL Features

CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2301APAL Applications

There are a lot of Advanced Linear Devices Inc. ALD2301APAL linear comparators applications.

• Laptop Computers
• Portable and Battery-Powered Systems
• Power Supervision
• Zero-Crossing Detectors
• System control and monitoring
• Multivibrators and High-Voltage Digital Logic Gates
• Security Detection Systems
• Analog front end
• General Purpose Low Voltage Applications
• High-Speed Differential Line Receiver