ALD2321ASCL

ALD2321ASCL Overview

In order to facilitate transportation, it is packaged in 16-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL .The chip is packaged with Tube .This is a typical comparator of type General Purpose .In total, it contains 2 elements.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .Electronic comparator has 16 pins.A quiescent current of 180μA is observed in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 180μA .If the current supply exceeds 180μA , the comparator could malfunction.In general, temperatures higher than 70°C are not recommended.Comparator electronics cannot be operated at a temperature lower than 0°C .Compatibility is defined as 10V when the comparator is operating at its maximum supply voltage.Using a voltage as low as 3V is possible for this comparator.To ensure a high level of output quality, 2 channels work together.The part is based on EPAD? .

ALD2321ASCL Features

CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2321ASCL Applications

There are a lot of Advanced Linear Devices Inc. ALD2321ASCL linear comparators applications.

• Pulse, Squarewave, and Time Delay Generators
• Body Control Modules
• Infotainment and Clusters
• General Purpose Low Voltage Applications
• Industrial
• Simple Analog-to-Digital Converters (ADCs)
• Consumer Medical Electronics
• Appliances
• Security Detection Systems
• Hand-Held Electronics