ALD2321BSCL

ALD2321BSCL Overview

For convenience, it is packaged in 16-SOIC (0.154, 3.90mm Width) .Output type CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL is used for this comparator.This package has been designed with Tube .It's a typical General Purpose comparator.The total number of elements is 2 .In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator consists of 16 pins.There is a quiescent current of 180μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 180μA when using the device.A current supply greater than 180μA may result in the comparator malfunctioning.You are allowed to input a maximum current of 20pA into the device.Comparator electronics is not recommended to operate at a temperature higher than 70°C .Temperatures below 0°C are not suitable for the device.A comparator's maximum supply voltage is 10V .There is a minimum supply voltage of 3V for this comparator.For the output quality to be maintained, 2 channels work together.Comparator electronics is a comparator part from the EPAD? series.

ALD2321BSCL Features

CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2321BSCL Applications

There are a lot of Advanced Linear Devices Inc. ALD2321BSCL linear comparators applications.

• General-Purpose Portable Devices
• Infotainment and Clusters
• Set Top Boxes
• Ultra-Low Power Systems
• Wide Range VCO; MOS Clock Timers
• High-Speed Sampling Circuits
• Window Comparators
• DC/DC and AC/DC power supplies
• RC Timers
• Handheld Instruments