AOZ1084DI

AOZ1084DI Overview

On the board, there is also a 8-WFDFN Exposed Pad package that saves space.LED drivers with this design have 1 outputs.The led driver mounting is done by using Surface Mount.In this case, it emerges as a DC DC Regulator with a high efficiency.It is possible for the led driver ic to operate normally at -40°C~85°C TA.As a result, Lighting, Signage is likely to benefit greatly.Based on the frequency of 450kHz, it operates.To form its configuration, 8 pins are used.It is possible for undetermined failures to occur if the voltage supply is lower than 4.5V.It is estimated that there are 1 segments.It is mounted in the way of Surface Mount.Ideally, the supply voltage should be 36V.The supply voltage is optimized to offer a maximum value of 36V.It achieves maximum efficiency with a minimal voltage supply of 4.5V.Temperatures above 85°C should not be allowed to exceed operating temperatures in order to ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.

AOZ1084DI Features

Available in the 8-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 450kHz

AOZ1084DI Applications

There are a lot of Alpha & Omega Semiconductor Inc. AOZ1084DI LED Driver ICs applications.

• LED headlights
• Replacement lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Scanners and Handy Terminals
• White LED Backlight for portable equipment
• Auxiliary lights for on-vehicle cameras
• Portable lighting
• General lighting
• Down lights
• LED Lightings for Inspection Devices