APX810-29SAG-7

APX810-29SAG-7 Overview

A total of 3 terminals are used to mount this power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 3 pins on the board. Pin count of the power management is 3. Supply voltage (Vsup) should be at least 1.1V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 30μA supply current present in the power management. It is always advisable to use APX810, the base supervisor number, when searching for similar PMICs from the manufacturer. It is possible to monitor 1 inputs at the same time on the power management as a whole.

APX810-29SAG-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current

APX810-29SAG-7 Applications

There are a lot of Diodes Incorporated APX810-29SAG-7 Voltage Supervisors applications.

• Fire equipment power monitoring system
• Consumer electronics
• Microcontroller system
• Rechargeable batteries
• Network equipment
• WiFi router
• Power distribution systems of infant care room
• Power distribution systems of operating room
• Data storage applications
• Telecommunications equipment