APX810-40SAG-7

APX810-40SAG-7 Overview

As you can see, this power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 3 pins on power management. 3 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supply current of the power management is 30μA. There are other features such as RESET THRESHOLD VOLTAGE IS 4.0V to name a few. For similar manage ics search of the manufacturer, you can always refer to APX810, the base PMIC number. In total, there are 1 inputs on the power management that can be monitored.

APX810-40SAG-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current

APX810-40SAG-7 Applications

There are a lot of Diodes Incorporated APX810-40SAG-7 Voltage Supervisors applications.

• Detection of phase imbalance
• Sensitive sensors
• Power communication system
• Dash board
• Unattended substation automation
• Smartphones
• Rechargeable batteries
• Utility meter
• Battery-powered equipment
• Set top box