APX825A-23W6G-7

APX825A-23W6G-7 Overview

There are 6 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes SOT-23-6 functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 6 pins in it. This power management has 6 pins. It is recommended that Vsup should not be less than 1.1V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 40μA supply current present in the power management. It is always advisable to use APX825A, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 40μA can be used. On the power management, 1 inputs are monitored.

APX825A-23W6G-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
40μA operating supply current

APX825A-23W6G-7 Applications

There are a lot of Diodes Incorporated APX825A-23W6G-7 Voltage Supervisors applications.

• Automotive power systems
• Precision measurement
• Battery cars
• Display equipment
• Leakage current detection
• Unattended substation automation
• Military communications
• Kitchen appliances
• Insulation fault location system
• Embedded computing