ATF1508AS-15JC84

ATF1508AS-15JC84 Overview

There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is enclosed in a J package.The device is programmed with 64 I/O ports.The device is programmed with 84 terminations.This electrical part has a terminal position of QUADand is connected to the ground.An electrical supply voltage of 5V is used to power it.The part belongs to Programmable Logic Devices family.84pins are programmed on the chip.The 3000gates serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.In this case, it is mounted by Surface Mount.The 84pins are designed into the board.It operates with the maximal supply voltage of 5.25V.With a minimal supply voltage of [0], it operates.There are 64 programmable I/Os in this system.There is a maximum frequency of 100MHz.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.There are 8 logic blocks (LABs) in its basic building block.A maximum frequency of less than 100MHzis recommended.Programmable logic types are divided into EE PLD.

ATF1508AS-15JC84 Features

J package
64 I/Os
84 pin count
84 pins
8 logic blocks (LABs)

ATF1508AS-15JC84 Applications

There are a lot of Atmel (Microchip Technology) ATF1508AS-15JC84 CPLDs applications.

• TIMERS/COUNTERS
• High speed graphics processing
• Wide Vin Industrial low power SMPS
• White goods (Washing, Cold, Aircon ,...)
• Digital designs
• Address decoders
• USB Bus
• Custom state machines
• Bootloaders for FPGAs
• Protection relays