ATF1508AS-7JC84

ATF1508AS-7JC84 Overview

There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is enclosed in a J package.As you can see, this device has 64 I/O ports programmed into it.84terminations have been programmed into the device.The terminal position of this electrical component is QUAD.It is powered by a voltage of 5V volts.There is a part included in Programmable Logic Devices.There are 84pins on the chip.In digital circuits, there are 3000gates, which act as a basic building block.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.The electronic part is mounted by Surface Mount.The pins are [0].This device operates at a voltage of 5.25V when the maximum supply voltage is applied.It operates with the minimal supply voltage of 4.75V.There are a total of 64 Programmable I/Os.There should be a temperature above 0°Cat the time of operation.A temperature below 70°Cshould be used as the operating temperature.The maximal frequency should be lower than 166.7MHz.Types of programmable logic are divided into EE PLD.

ATF1508AS-7JC84 Features

J package
64 I/Os
84 pin count
84 pins

ATF1508AS-7JC84 Applications

There are a lot of Atmel (Microchip Technology) ATF1508AS-7JC84 CPLDs applications.

• Complex programmable logic devices
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Power automation
• Dedicated input registers
• Field programmable gate
• Reset swapping
• LED Lighting systems
• White goods (Washing, Cold, Aircon ,...)
• Parity generators
• Voltage level translation