ATF1508AS-7JX84

ATF1508AS-7JX84 Overview

There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 84-LCC (J-Lead) package containing it.There are 64 I/Os on the board.Ideally, the chip should be packaged by Tube.Due to its reliability, it is operated at a temperature of [0].It is mounted in the way of Surface Mount.As part of the ATF15xxseries, it is a type of FPGA.The ATF1508ASshows its related parts.For digital circuits, there are 3000gates. These devices serve as building blocks.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.There are 84 pins on the device.There is a maximum supply voltage of 5.25V.In order for it to operate, a supply voltage of 4.75Vis required.A programmable I/O count of 64 has been recorded.This frequency is 166.7MHz.The maximum frequency should not exceed 166.7MHz.Ideally, the operating temperature should be greater than 0°C.It is recommended that the operating temperature be lower than 70°C.Its basic building block is composed of 8 logic blocks (LABs).The fundamental building block consists of 8logic elements/cells.

ATF1508AS-7JX84 Features

84-LCC (J-Lead) package
64 I/Os
The operating temperature of 0°C~70°C TA
84 pins
8 logic blocks (LABs)

ATF1508AS-7JX84 Applications

There are a lot of Microchip Technology ATF1508AS-7JX84 CPLDs applications.

• Bootloaders for FPGAs
• TIMERS/COUNTERS
• Interface bridging
• USB Bus
• Page register
• Portable digital devices
• Multiple DIP Switch Replacement
• Programmable polarity
• Multiple Clock Source Selection
• State machine design