ATF1508AS-7QC160

ATF1508AS-7QC160 Overview

There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a PQFP package containing it.The device is programmed with 96 I/O ports.There is a 160terminations set on devices.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 5Vprovides power to the device.This part is included in Programmable Logic Devices.The chip is programmed with 160 pins.As a building block for digital circuits, there are 3000gates.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].This device is mounted by Surface Mount.The 160pins are designed into the board.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.There are 96 Programmable I/Os.In order to operate properly, the operating temperature should be higher than 0°C.The operating temperature should be lower than 70°C.The maximum frequency should not exceed 166.7MHz.There are several types of programmable logic that can be categorized as EE PLD.

ATF1508AS-7QC160 Features

PQFP package
96 I/Os
160 pin count
160 pins

ATF1508AS-7QC160 Applications

There are a lot of Atmel (Microchip Technology) ATF1508AS-7QC160 CPLDs applications.

• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• High speed graphics processing
• Programmable power management
• STANDARD SERIAL INTERFACE UART
• TIMERS/COUNTERS
• Parity generators
• Configurable Addressing of I/O Boards
• I2C BUS INTERFACE
• ROM patching
• Wireless Infrastructure Base Band Unit and Remote Radio Unit