ATF750CL-15SI

ATF750CL-15SI Overview

There are 10 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.Sis the package in which it resides.There are 10 I/Os programmed in it.Devices are programmed with terminations of [0].This electrical component has a terminal position of 0.The power source is powered by 5Vvolts.A chip with 24pins is programmed.This device is also capable of displaying [0].There are 750 gates, which are devices that acts as a building block for digital circuits. A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.The electronic component is mounted by Surface Mount.There are 24 pins embedded in the device.A maximum supply voltage of 5.5Vis used in its operation.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.In order for the device to operate, it requires 5V power supplies.There can be 71MHz frequency achieved.The operating temperature should be higher than -40°C.A temperature lower than 85°Cis recommended for operation.Input signals are detected by 11dedicated inputs.There should be a lower maximum frequency than 71MHz.In programmable logic, a type of logic can be categorized as EE PLD.

ATF750CL-15SI Features

S package
10 I/Os
24 pin count
24 pins
5V power supplies

ATF750CL-15SI Applications

There are a lot of Atmel (Microchip Technology) ATF750CL-15SI CPLDs applications.

• D/T registers and latches
• Wide Vin Industrial low power SMPS
• Portable digital devices
• TIMERS/COUNTERS
• Battery operated portable devices
• Complex programmable logic devices
• Timing control
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• Reset swapping
• Programmable polarity