All Products

AUIPS1011RTRL

6/28V N-Channel 2.29mm PMIC Automotive, AEC-Q100 Series AUIPS1011R 3 Pin 14V TO-252-3, DPak (2 Leads + Tab), SC-63


  • Manufacturer: Infineon Technologies
  • Origchip NO: 376-AUIPS1011RTRL
  • Package: TO-252-3, DPak (2 Leads + Tab), SC-63
  • Datasheet: PDF
  • Stock: 738
  • Description: 6/28V N-Channel 2.29mm PMIC Automotive, AEC-Q100 Series AUIPS1011R 3 Pin 14V TO-252-3, DPak (2 Leads + Tab), SC-63 (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 23 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Number of Pins 3
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2014
Series Automotive, AEC-Q100
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 2
ECCN Code EAR99
Resistance 10mOhm
Terminal Finish Matte Tin (Sn) - with Nickel (Ni) barrier
Subcategory Peripheral Drivers
Max Power Dissipation 2.5W
Terminal Position SINGLE
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 14V
Terminal Pitch 2.29mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AUIPS1011R
JESD-30 Code R-PSSO-G2
Number of Outputs 1
Output Type N-Channel
Max Output Current 6A
Supply Voltage-Max (Vsup) 28V
Power Supplies 6/28V
Supply Voltage-Min (Vsup) 6V
Interface On/Off
Output Configuration Low Side
Power Dissipation 2.5W
Output Current 6A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Nominal Input Voltage 6V
Ratio - Input:Output 1:1
Voltage - Load 36V Max
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 10m Ω
Turn Off Time 700 μs
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Length 6.54mm
Width 6.095mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant

AUIPS1011RTRL Overview


It is packaged in the form of a Tape & Reel (TR).This package is included in TO-252-3, DPak (2 Leads + Tab), SC-63.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.This object belongs to the AUIPS1011R family.It contains 2 terminations.The 3 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 6A to meet the operation criteria.Supply voltages of 14V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.In this case, there is 10mOhm resistance in the LED driving board.The Automotive, AEC-Q100 series includes this electrical component.This results in a 6A output current.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this case, Vsup (maximum supply voltage) is set to 28V.Normal operation requires a voltage above 6V for the supply voltage.This part's power supply is 6/28V.

AUIPS1011RTRL Features


Supplied from 14V
Resistance of 10mOhm

AUIPS1011RTRL Applications


There are a lot of Infineon Technologies AUIPS1011RTRL Power Switches ICs applications.

  • Handheld Devices
  • Set-top-box
  • PC Cards
  • USB3.1 Power Delivery
  • Wireless/Networking Cards
  • Low Voltage I/O System Power
  • HDD, SSD
  • Portable GPS
  • PDAs
  • Telecom and Network Systems