English

All Products

View All >>
  • AUIPS1031STRL

AUIPS1031STRL

6/28V N-Channel 2.54mm PMIC Automotive, AEC-Q100 Series AUIPS1031S 3 Pin 14V TO-263-3, D2Pak (2 Leads + Tab), TO-263AB


  • Manufacturer: Infineon Technologies
  • Origchip NO: 376-AUIPS1031STRL
  • Package: TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
  • Datasheet: PDF
  • Stock: 855
  • Description: 6/28V N-Channel 2.54mm PMIC Automotive, AEC-Q100 Series AUIPS1031S 3 Pin 14V TO-263-3, D2Pak (2 Leads + Tab), TO-263AB (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
Number of Pins 3
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2010
Series Automotive, AEC-Q100
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - with Nickel (Ni) barrier
Subcategory Peripheral Drivers
Max Power Dissipation 3.1W
Terminal Position SINGLE
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 14V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AUIPS1031S
Number of Outputs 1
Output Type N-Channel
Max Output Current 3.3A
Supply Voltage-Max (Vsup) 28V
Power Supplies 6/28V
Supply Voltage-Min (Vsup) 6V
Interface On/Off
Output Configuration Low Side
Power Dissipation 3.1W
Output Current 3.3A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 36V Max
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 40m Ω
Turn Off Time 200 μs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Width 9.08mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 18 Weeks
Mount Surface Mount

AUIPS1031STRL Overview


The LED driver's packaged as a Tape & Reel (TR).It is included in the package TO-263-3, D2Pak (2 Leads + Tab), TO-263AB.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There is a default setting of 1 for output.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts has been specified.It comes under the family of AUIPS1031S.A total of 3 terminations can be found in it.During operation, the 3 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 3.3A in order to meet the operation criteria.High efficiency is possible at 14V supply voltage.It is positioned in the direction of Surface Mount.It belongs to the Automotive, AEC-Q100 series.When this case is used, the output current is set to 3.3A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage is set to 28V.The supply voltage (Vsup) should be kept above 6V for normal operation.6/28V is the power supply of the part.

AUIPS1031STRL Features


Supplied from 14V

AUIPS1031STRL Applications


There are a lot of Infineon Technologies AUIPS1031STRL Power Switches ICs applications.

  • PC Card Hot Swap
  • Set-top-box
  • Portable/Handheld Devices
  • USB3.1 Power Delivery
  • HDD and SSD
  • PC Cards
  • Various applications equipped with buttons
  • Hard Disk Drives
  • Portable Music Players
  • Hot Swap