BD45301G-TR

BD45301G-TR Overview

There are 5 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Voltage Detector products. Manage ics operate at 5V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 5 pins on IC management. 5 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 950mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The power management's supply current is 850nA. Power management is also possible to add other features such as DETECTION THRESHOLD VOLTAGE IS 3.0V to name a few. A similar IC managements number of the manufacturer can always be found by using BD45, the base power ics number. The maximum supply temperature voltage supervisor can handle is 2.85μA. The PMIC is a kind of the well-known BD45xxx series of products.

BD45301G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV
850nA operating supply current

BD45301G-TR Applications

There are a lot of ROHM Semiconductor BD45301G-TR Voltage Supervisors applications.

• Set top box
• Military communications
• Consumer electronics
• Leakage protection
• WiFi router
• Detection of phase loss
• Electronics installed in the vehicle
• Microprocessor system
• DVR
• Cloud computing