BD45311G-TR

BD45311G-TR Overview

As you can see, this power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a lot of similarities between this IC management and other Voltage Detector products. A supply voltage of 5.1V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 5 pins on IC management. There are 5 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 950mV. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. There is a supply current of 850nA for the power management. A similar IC managements number of the manufacturer can always be found by using BD45, the base power ics number. The maximum supply temperature is 2.85μA. As you may know, this PMIC comes from the well-known BD45xxx series product line.

BD45311G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV
850nA operating supply current

BD45311G-TR Applications

There are a lot of ROHM Semiconductor BD45311G-TR Voltage Supervisors applications.

• Refrigeration
• Electronics installed in the vehicle
• Transformer load monitoring equipment
• Personal computers
• Efficient information transmission
• Electrical fire monitoring system
• Automotive permanent magnet synchronous motors
• Automotive power systems
• Functional modules
• Medical-specific isolation transformer