BD45361G-TR

BD45361G-TR Overview

There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are a lot of similarities between this IC power and other Voltage Detector products. The supervisor is always powered by a 5.6V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. A total of 5 pins are located on this power management. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 9.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~105°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is always advisable to use BD45, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 3μA. It is one of the well-known BD45xxx series power ic line.

BD45361G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV

BD45361G-TR Applications

There are a lot of ROHM Semiconductor BD45361G-TR Voltage Supervisors applications.

• Radar
• emergency room
• Important electronics for automotive safety
• Cloud computing
• Transformer load monitoring equipment
• Fire equipment power monitoring system
• Smartphones
• DSP
• Medical-specific isolation transformer
• WiFi router