BD46312G-TR

BD46312G-TR Overview

It is mounted through 5 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. A supply voltage of 5.1V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. A total of 5 pins are located on this power management. This power management system has 5 pins. There should be a minimum voltage supply (Vsup) of 950mV for this PMIC. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. Power management has an output of Push-Pull, Totem Pole during operation. If you want to search for similar IC managements of this manufacturer, you can always refer to BD46, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 2.85μA. As you can see, this IC power comes from the well-known BD46xxx series of products.

BD46312G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV

BD46312G-TR Applications

There are a lot of ROHM Semiconductor BD46312G-TR Voltage Supervisors applications.

• Urban rail transit weak current power monitoring
• Detection of phase imbalance
• Display equipment
• Insulation fault location system
• DVR
• WiFi router
• Magnetic resonance imaging
• Smartphones
• Detection of phase sequence
• Unattended substation automation