BD46465G-TR

BD46465G-TR Overview

There are 5 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. As with other Voltage Detector products, this IC management also offers a wide range of benefits. Manage ics operate at 6.6V supply voltages. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 5 pins on IC management. This power management system has 5 pins. It is recommended that Vsup should not be less than 950mV for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 9.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. A similar IC managements number of the manufacturer can always be found by using BD46, the base power ics number. A maximum supply temperature of 3.15μA can be used. The IC power that you are looking at comes from our well-known BD46xxx series product line.

BD46465G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV

BD46465G-TR Applications

There are a lot of ROHM Semiconductor BD46465G-TR Voltage Supervisors applications.

• Telecommunications equipment
• Refrigeration
• Battery cars
• Medical-specific insulation monitor
• Consumer electronics
• Military electronics
• Leakage current detection
• Linux and server computing
• Detection of phase sequence
• Automotive power systems