BD4731G-TR

BD4731G-TR Overview

There are 5 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Voltage Detector products. A supply voltage of 2.988V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. 5 pins are present in total in this power management. The pins of the power management system count 5. A voltage (Vsup) that doesn't fall below 650mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~75°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. You can always use BD47, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3μA can be used. The IC power that you are looking at comes from our well-known BD47xx series product line.

BD4731G-TR Features

Voltage Detector type
Minimum supply voltage of 650mV

BD4731G-TR Applications

There are a lot of ROHM Semiconductor BD4731G-TR Voltage Supervisors applications.

• Leakage protection
• Power distribution systems of operating room
• Smartphones
• Sensitive sensors
• Solar power charger
• Detection of phase loss
• Transformer load monitoring equipment
• Power distribution systems of ICU
• Automotive power systems
• WiFi router