BD4737G-TR

BD4737G-TR Overview

This power management consists of 5 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Voltage Detector manage ics. The supervisor is always powered by a 3.576V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 5 pins on the board. The pins of the power management system count 5. A voltage (Vsup) that doesn't fall below -300mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~75°C TA. During operation, this power management system outputs Open Drain or Open Collector. For similar manage ics search of the manufacturer, you can always refer to BD47, the base PMIC number. The maximum supply temperature voltage supervisor can handle is 3μA. The IC power that you are looking at comes from our well-known BD47xx series product line.

BD4737G-TR Features

Voltage Detector type
Minimum supply voltage of -300mV

BD4737G-TR Applications

There are a lot of ROHM Semiconductor BD4737G-TR Voltage Supervisors applications.

• Power distribution systems of CCU
• Power distribution systems of infant care room
• Smartphones
• Electronics installed in the vehicle
• Functional modules
• DSP
• Urban rail transit weak current power monitoring
• Kitchen appliances
• Consumer electronics
• Satellite navigation