BD4824G-TR

BD4824G-TR Overview

Power management is packaged in a Tape & Reel (TR) way. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Voltage Detector products. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. In total, the power management has 5 pins in it. There are 5 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than -300mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~105°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. Supplied with a operating current of 900nA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using BD48, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 1.53μA. As you can see, this IC power comes from the well-known BD48xxx series of products.

BD4824G-TR Features

Voltage Detector type
Minimum supply voltage of -300mV
900nA operating supply current

BD4824G-TR Applications

There are a lot of ROHM Semiconductor BD4824G-TR Voltage Supervisors applications.

• Network equipment
• WiFi router
• Leakage current detection
• Embedded computing
• Consumer electronics
• Important electronics for automotive safety
• Sensitive sensors
• Stable power system
• Automotive permanent magnet synchronous motors
• Personal computers