BD4838G-TR

BD4838G-TR Overview

There are 5 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. The supervisor is always powered by a 3.6V volt supply. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 5 pins on power management. This power management system has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than -300mV volts. The supply voltage (Vsup) should not exceed 10V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~105°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. If you want to search for similar IC managements of this manufacturer, you can always refer to BD48, which is the base power ics number. A power supply of 4.8V watts is required for the operation of this power management. Voltage supervisor can work with a supply temperature of 1.68μA at the most. As the name implies, this supervisor is a kind of the famous BD48xxx series product line.

BD4838G-TR Features

Voltage Detector type
Minimum supply voltage of -300mV

BD4838G-TR Applications

There are a lot of ROHM Semiconductor BD4838G-TR Voltage Supervisors applications.

• Network equipment
• Multi-voltage system
• DSP
• Radar
• Detection of phase sequence
• Linux and server computing
• Embedded computing
• Satellite navigation
• Analog circuit
• Automotive permanent magnet synchronous motors