BD4853FVE-TR

BD4853FVE-TR Overview

This power management consists of 5 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. Please find attached SOT-665 functions for your reference in this IC power. As with other Voltage Detector products, this IC management also offers a wide range of benefits. The supervisor is always powered by a 5.1V volt supply. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 5. This power management has 5 pins. A voltage (Vsup) that doesn't fall below -300mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 10V volts in this IC power. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~105°C TA . Power management has an output of Open Drain or Open Collector during operation. It is always advisable to use BD48, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 1.98μA. As you can see, this IC power comes from the well-known BD48xxx series of products.

BD4853FVE-TR Features

Voltage Detector type
Minimum supply voltage of -300mV

BD4853FVE-TR Applications

There are a lot of ROHM Semiconductor BD4853FVE-TR Voltage Supervisors applications.

• Power communication system
• Detection of phase sequence
• Low voltage/high power - AI, GPU
• WiFi router
• Refrigeration
• Fire equipment power monitoring system
• Battery-powered equipment
• Detection of phase imbalance
• Display equipment
• Electric heating appliances