BD4854FVE-TR

BD4854FVE-TR Overview

It is mounted through 5 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a SOT-665 package. There are a lot of similarities between this IC management and other Voltage Detector products. Manage ics operate at 5.2V supply voltages. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. A total of 5 pins are located on this power management. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than -300mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~105°C TA. Power management has an output of Open Drain or Open Collector during operation. For similar manage ics search of the manufacturer, you can always refer to BD48, the base PMIC number. The power management can work with a maximum supply temperature of 1.98μA. As you can see, this IC power comes from the well-known BD48xxx series of products.

BD4854FVE-TR Features

Voltage Detector type
Minimum supply voltage of -300mV

BD4854FVE-TR Applications

There are a lot of ROHM Semiconductor BD4854FVE-TR Voltage Supervisors applications.

• Cloud computing
• Microcontroller system
• Detection of phase loss
• WiFi router
• Insulation fault location system
• Microprocessor system
• Detection of phase imbalance
• DVR
• DC stabilized power supply module
• Network equipment