English

All Products

View All >>
  • BD6517F-E2

BD6517F-E2

5V N-Channel PMIC BD651* 8 Pin 5V 8-SOIC (0.173, 4.40mm Width)


  • Manufacturer: ROHM Semiconductor
  • Origchip NO: 687-BD6517F-E2
  • Package: 8-SOIC (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 395
  • Description: 5V N-Channel PMIC BD651* 8 Pin 5V 8-SOIC (0.173, 4.40mm Width) (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 10 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.173, 4.40mm Width)
Number of Pins 8
Operating Temperature -25°C~85°C TA
Packaging Tape & Reel (TR)
Published 2005
Feature Status Flag
Pbfree Code yes
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination SMD/SMT
ECCN Code EAR99
Resistance 110mOhm
Additional Feature CONTROL LOGIC: ACTIVE LOW
Subcategory Peripheral Drivers
Max Power Dissipation 560mW
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 5V
Base Part Number BD651*
Pin Count 8
Number of Outputs 2
Output Voltage 6V
Output Type N-Channel
Max Output Current 500mA
Power Supplies 5V
Supply Voltage-Min (Vsup) 3V
Interface On/Off
Nominal Supply Current 500mA
Output Configuration High Side
Power Dissipation 560mW
Output Current 500mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 2 ms
Max Output Voltage 6.3V
Switch Type USB Switch
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 20 μs
Min Output Voltage -300mV
Ratio - Input:Output 1:2
Voltage - Load 3V~5.5V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Turn On Time 6000 µs
Output Peak Current Limit-Nom 1.65A
Rds On (Typ) 110m Ω
Built-in Protections OVER CURRENT; OVER VOLTAGE; THERMAL
Height 1.5mm
Length 5mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

BD6517F-E2 Overview


The package is in the form of a Tape & Reel (TR).Package 8-SOIC (0.173, 4.40mm Width) contains it.A Surface Mount mounting is used for the LED driving board.A USB Switch switch type is owned by it.The temperature should be set to -25°C~85°C TA to ensure reliable functioning.There are 2 outputs available on this lighting driver.A voltage of Not Required is used to power it.It has a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.It belongs to the BD651* family.It has a total of 8 terminations.The 8 pins are used to operate the LED driver.It is important to note that the LED driving board has 2 functions.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.Supply voltages of 5V allow for high efficiency.It is mounted in the way of Surface Mount.8 pins are connected to it in total.110mOhm is the resistance of the lighting driver.In this case, the output current will be set to 500mA.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3V.The power supply of the part is 5V.It has a maximum input voltage of 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.As well as producing CONTROL LOGIC: ACTIVE LOW, this LED driving board is capable of producing [1].

BD6517F-E2 Features


Supplied from 5V
Resistance of 110mOhm
Additional features like CONTROL LOGIC: ACTIVE LOW

BD6517F-E2 Applications


There are a lot of ROHM Semiconductor BD6517F-E2 Power Switches ICs applications.

  • Wireless Headsets
  • Low Voltage I/O System Power
  • Telecom and Network Systems
  • USB Protection
  • Set-top-box
  • Wireless/Networking Cards
  • USB3.1 Power Delivery
  • Mobile Communication Devices
  • Portable/Handheld Devices
  • Hard Disk Drives