BQ2000SN-B5TRG4

BQ2000SN-B5TRG4 Overview

In the Tape & Reel (TR) package, you will find it.It can be found in package 8-SOIC (0.154, 3.90mm Width).Mounting type for the device is Surface Mount.If you wish to ensure reliable performance, set the temperature to -20°C~70°C TA.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.Charge the device by supplying it with Constant - Programmable current.A list of related parts can be found by searching for the base part number BQ2000.As far as the terminations are concerned, there are 8.The device has a total of 8 pins.In addition to Current, Timer, Voltage, there are several other programmable options.There are a total of 8 pins that have to be connected for the product to function correctly.It appears that there are 1 channels available at this time.This should be able to operate off of a battery that has a voltage of 5V.There is no damage to the device if an input voltage of 6V is applied.There is a constant output current of 2A when it is operating.This device belongs to the subcategory of Power Management Circuits.The device can operate at a voltage of 4V as low as possible.It was determined during the design process that Vsup (maximum supply voltage) should be set to 1mA.A power supply setting of 0 has been assigned to the part.A minimum input voltage of 4V volts is required for this device.As a rule of thumb, the supply voltage needs to be set to 5V for optimum efficiency.300kHz is the switching frequency of the part.

BQ2000SN-B5TRG4 Features

1 channels
Power Management Circuits subcategory
Switching frequency of 300kHz
8-SOIC (0.154, 3.90mm Width) package

BQ2000SN-B5TRG4 Applications

There are a lot of Texas Instruments BQ2000SN-B5TRG4 Battery Chargers ICs applications.

• Smart cameras
• Painting boat
• Solar charging
• Emergency/Security
• Model aircraft
• Energy harvesting
• Fast charge
• Electric tour bus
• Portable speaker systems
• Locomotive