BQ24103RHLR

BQ24103RHLR Overview

There is a package Cut Tape (CT) available.In order to make it more convenient, it has been included in the 20-VFQFN Exposed Pad package.A mounting type of Surface Mount has been specified for this device.The best way to adjust the temperature is to set it to -40°C~85°C TA.The device relies on an analog IC called BATTERY CHARGE CONTROLLER to operate.If the device needs to be charged, it must be supplied with Constant - Programmable current.A list of related parts can be found by searching for the base part number BQ24103.The overall number of terminations that can be found in it is 20 as a whole.The device has 20 pins in total.Current, Timer are a programmable feature.The operation?are 20 pins.A supply voltage of no more than 16V is required for the device to operate properly.In the case of 7V output voltage, there is a possibility of optimal efficiency.It is performed with a current output of 2A for the output of the operation.This circuit can function at a low supply voltage, such as 4.35VV.During the design process, Vsup (maximum supply voltage) was set to 5mA.In the bqSWITCHER? series, this electrical component is found.There is a 4.3V volt minimum input voltage requirement.This part has a switching frequency of 1.1MHz and operates with this frequency.There is a maximum input voltage of 16V volts that it can take.In order for the operation to be carried out successfully, a maximum output supply voltage of 8.4V is required.In the course of operation, the maximum output current is reduced to 2A.

BQ24103RHLR Features

Switching frequency of 1.1MHz
20-VFQFN Exposed Pad package

BQ24103RHLR Applications

There are a lot of Texas Instruments BQ24103RHLR Battery Chargers ICs applications.

• Portable medical instruments
• Smart speakers
• Marine buoy lights
• Military equipment
• Mobile point-of-sale (mPOS) terminals
• Energy harvesting
• Portable devices
• Remote control toys
• Wearables
• Rental fleets