BQ24401PW

BQ24401PW Overview

There is a package Tube available.There is a 8-TSSOP (0.173, 4.40mm Width) package that comes with this item.This device has a mounting type of Surface Mount.It is best to set the temperature to -20°C~70°C TA.In order for the device to function, an analog IC named POWER SUPPLY SUPPORT CIRCUIT must be used.Parts related to the base part number BQ24401 can be found based on that number.A total of 8 terminations can be found in it.The device is equipped with a total of 8 pins.In addition to Timer, a variety of programmable features are available.It operates on the basis of 8 pins.It appears that there are 1 channels available at this time.If it runs off of a 5V battery, then it should be able to run continuously.If the supply voltage exceeds 6V, the device will not function properly.Operation is done using a 2A output current.The device you are looking at belongs to the subcategory of Power Management Circuits.A supply voltage of 4V is suitable for it, because it can operate with a low supply voltage.In most cases, the maximum supply voltage (Vsup) is set to 1mA.The part's power supply is set to 5V.Input voltage is limited to 4V volts at the lowest.Optimal performance can be achieved by setting the supply voltage to 5V.300kHz switching frequency is used by the part.

BQ24401PW Features

1 channels
Power Management Circuits subcategory
Switching frequency of 300kHz
8-TSSOP (0.173, 4.40mm Width) package

BQ24401PW Applications

There are a lot of Texas Instruments BQ24401PW Battery Chargers ICs applications.

• Material handling
• Tablets
• Electric lift car
• Electric boat
• Portable speaker systems
• Wearables
• Automotive battery charger circuits
• Industrial
• USB power delivery (USB-C) devices
• Charging cradle for wearable devices