BQ24600RVAR

BQ24600RVAR Overview

It is available in the package Tape & Reel (TR).The product comes in the package of a 16-VFQFN Exposed Pad.There is a type of mounting for this device: Surface Mount.The best way to adjust the temperature is to set it to -40°C~85°C TA.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.To charge the device, a current of Constant - Programmable is required.Based on the base part number BQ24600, it is possible to find related parts for this device.I have found that the number of terminations found in it as a whole is 16.For the battery pack, it is set to 14V Max.There are 16 pins on it, so it has a very simple design.There are various programmable features, such as Current.For the product to work correctly, 16 pins are required, and a connection to each pin is required.The number of available channels is 1.With 20V, you can use a battery to power it.It is crucial that the supply voltage of the device does not exceed 28V for the device to work properly.A 10A output current is used for operation.The device falls under the Power Management Circuits subcategory.This device can work at as low a voltage as possible, such as 5V.It is configured to be 5mA for Vsup (maximum supply voltage).Voltage input must be at least 5V volts.1.2MHz is the switching frequency of the part.

BQ24600RVAR Features

Battery pack voltage of 14V Max
1 channels
Power Management Circuits subcategory
Switching frequency of 1.2MHz
16-VFQFN Exposed Pad package

BQ24600RVAR Applications

There are a lot of Texas Instruments BQ24600RVAR Battery Chargers ICs applications.

• Mobile lighting
• MP3, MP4 player
• Automotive electronics
• Robot
• Forklift
• Painting boat
• Rental fleets
• Cellphones
• Industrial handhelds
• Pallet jacks