BU4914G-TR

BU4914G-TR Overview

There are 5 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Manage ics operate at 2.4V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 5. Power managment ic pin count is 5. It is recommended that Vsup should not be less than 700mV for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 550nA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to BU4914, which is the base power ics number. A maximum supply temperature of 1.05μA can be used.

BU4914G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4914G-TR Applications

There are a lot of ROHM Semiconductor BU4914G-TR Voltage Supervisors applications.

• Radar
• Analog circuit
• Low voltage/high power - AI, GPU
• Insulation fault location system
• Sensitive sensors
• Electric heating appliances
• Detection of phase loss
• Microprocessor system
• Display equipment
• Embedded computing