All Products

BU7241SG-TR

1 Channels 12mA per Channel 1pA 45 dB Instrumentational OP Amps 2.75V 1.8V~5.5V ±0.9V~2.75V BU7241 5 Pins SC-74A, SOT-753

Manufacturer: ROHM Semiconductor
Origchip NO: 687-BU7241SG-TR
Package: SC-74A, SOT-753
Datasheet: PDF
Stock: 411
Description: 1 Channels 12mA per Channel 1pA 45 dB Instrumentational OP Amps 2.75V 1.8V~5.5V ±0.9V~2.75V BU7241 5 Pins SC-74A, SOT-753(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	3V
Base Part Number	BU7241
Pin Count	5
Output Type	Rail-to-Rail
Operating Supply Voltage	2.75V
Number of Channels	1
Operating Supply Current	70μA
Nominal Supply Current	150μA
Output Current	10mA
Slew Rate	0.4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	45 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	12mA
Input Offset Voltage (Vos)	9mV
Bandwidth	900 kHz
Unity Gain BW-Nom	900 kHz
Voltage Gain	95dB
Power Supply Rejection Ratio (PSRR)	60dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	1mV
Low-Bias	YES
Micropower	YES
Length	2.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	20 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~105°C
Packaging	Tape & Reel (TR)
Published	2011
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL

BU7241SG-TR Overview

The linear amplifier is packaged in a SC-74A, SOT-753 case. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 5 terminations over the past year. The pins on this board total to 5 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. Instrumentation amplifier is a part of Operational Amplifier. An 5-pin op amp ic is included in the package. There is an input offset voltage of 9mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~105°C for optimal performance. Using a supply current of 70μA , this buffer op amp will be able to operate. Maintain 95dB as the voltage gain. Instrumentation amplifier has 1 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 2.75V. The instrumentation amplifier is packed in the form of TAPE AND REEL.

BU7241SG-TR Features

5 Pins
supply voltage of 3V
95dB voltage gain
Output Type: Rail-to-Rail

BU7241SG-TR Applications

There are a lot of ROHM Semiconductor BU7241SG-TR Instrumentational OP Amps applications.

Fast A/D and D/A converters
Test equipment
Power transmission
Video amplifiers
High input resistance broadband
Integrator circuits
Weak signal detection
Semiconductor detectors
Television broadcasting equipment
Signal transformation