CAT1026WI-28-GT3

CAT1026WI-28-GT3 Overview

A total of 8 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. There are 2 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 2 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. The total number of pins on this power management is 8. This power management has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.7V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 10μA. To find similar IC managements from the manufacturer, you can always search by CAT1026. At the most, voltage supervisor can work with a supply temperature of 3mA.

CAT1026WI-28-GT3 Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
10μA operating supply current

CAT1026WI-28-GT3 Applications

There are a lot of ON Semiconductor CAT1026WI-28-GT3 Voltage Supervisors applications.

• Smart meter
• Low voltage/high power - AI, GPU
• Medical-specific isolation transformer
• Urban rail transit weak current power monitoring
• Stable power system
• Power communication system
• Transformer load monitoring equipment
• Radio
• Precision measurement
• Unattended substation automation